2020 Fall Technical Training

In response to the current CDC recommendations, all technical training will be done virtually. To participate in the technical training you will need internet access and a device with speakers. You can participate with any PC. Laptop, Tablet or Smart Phone with internet access. We will be using an app/program called ZOOM which is free to download. This allows two way communication, just as if you were in the classroom. Instructions for the ZOOM meeting can be found in the technicans account. If you have questions please email us at updates@cematraining.com

CE 10 years

2020 Fall Training Catalog

October-December 2020

Class Coordinator Contacts: 

Maggie Johns @ Maggie.johns@carrierenterprise.com

Josh Goodman @ Josh.goodman@carrierenterprise.com

Use your training coupon to purchase the courses below


Course Information

Next Gen Infinity Greenspeed / Evolution Variable Speed Systems

We will cover installation of the outdoor unit, indoor unit, and User Interface. We will discuss features and functions of the system and how to ensure proper airflow and understand the critical charging of these systems. We will cover troubleshooting error codes and steps in determining the source of the error code.

This class is designed for installation and service personnel.

This class is one of the requirements for dealers to purchase Carrier and Bryant Variable Speed products. 

Course Outline 

  • Next Gen Greenspeed / Extreme, 24/26, 18/19 VS Installation
  • Next Gen Greenspeed / Extreme, 24/26, 18/19 VS Set Up and Operation
  • FE / FV Fan coil Setup and Operation
  • User Interface Startup / Using it as a service tool
  • Troubleshooting Codes Explained 
  • Troubleshooting Procedures 
  • Tools Necessary for Troubleshooting

Attendees passing the test at the end of the class will be eligible for 6 hrs continuing education NATE Hours and Distributor training hours.

NATE Class ID 6114-0018 Cost $35.00

Variable Speed System classes will be conducted in 3 (2-Hour Sessions).

Which will be held on these dates.

October (all on Thursdays from 8am – 10am)

                October 8th (session 1), Oct 15th (session 2), Oct 22nd (session 3)

November (all on Wednesdays from 8am – 10am)

                November 4th (session 1), Nov 11th (session 2), Nov 18th (session 3)

December (all on Tuesdays from 8am – 10am)

                December 1st (session 1), Dec 8th (session 2), Dec 15th (session 3)

To register, please select one of the following months:

Use your training coupon to purchase the courses below


Course Information

Carrier/Bryant Gas Furnace Service & Troubleshooting 

We will cover installation, operation and troubleshooting of the
Carrier/Bryant gas furnace. We will discuss features and functions of each model and how to set it up properly. Understanding the sequence of operation in troubleshooting. We will cover troubleshooting error codes and proper steps in determining the source of the error code.

This class is designed for installation and service personnel.

Course Outline

  • Gas Furnace Installation
  • Gas Furnace Set Up
  • Gas Furnace Sequence of Operation
  • Troubleshooting Codes Explained 
  • Troubleshooting Procedures
  • Tools Necessary for Troubleshooting 

Attendees passing the test at the end of the class will be eligible for 6 hrs continuing education NATE Hours and Distributor training hours.

NATE Class ID 6114-0009 Cost $35.00

Gas Furnace Service class will be conducted in 3 (2-Hour Sessions).

Which will be held on these dates.

October (all on Wednesday’s from 8am – 10am)

                October 7th (session 1), Oct 14th (session 2), Oct 21st (session 3)

November (all on Tuesday’s from 8am – 10am)

                November 3rd (session 1), Nov 10th (session 2), Nov 17th (session 3)

December (all on Thursday’s from 8am – 10am)

                December 3rd (session 1), Dec 10th (session 2), Dec 17th (session 3)

To register, please select one of the following months:

Use your training coupon to purchase the courses below


Course Information

Carrier Ductless Systems

We will cover installation, operation and troubleshooting of the Carrier/Bryant ductless systems. We will discuss features and functions of each model and how to set it up properly. We will cover troubleshooting error codes and proper steps in determining the source of the error code.

This class is designed for installation and service personnel.

Course Outline

  • Ductless single and Multi-head Installation
  • Ductless Set Up
  • Sequence of Operation
  • Troubleshooting Codes Explained
  • Troubleshooting Procedures
  • Tools Necessary for Troubleshooting

Attendees passing the test at the end of the class will be eligible for 4 hours continuing education NATE Hours and 6 hours Distributor training hours.

NATE Class ID 6114-0003 Cost $35.00

Ductless Installation & Service class will be conducted in 3 (2-Hour Sessions).

Which will be held on these dates.

October (all on Tuesday’s from 8am – 10am)

                October 6th (session 1), Oct 13th (session 2), Oct 20th (session 3)

November (all on Thursday’s from 8am – 10am)

                November 5th (session 1), Nov 12th (session 2), Nov 19th (session 3)

December (all on Wednesday’s from 8am – 10am)

                December 2nd (session 1), Dec 9th (session 2), Dec 16th (session 3)

To register, please select one of the following months:

Use your training coupon to purchase the courses below


Course Information

Check Test & Start up

Airflow is one of the most important factors in Residential system performance, charging, and system capacity with today’s advanced systems.  Using the industry’s “Best practices” and proper startup techniques are paramount to ensure the comfort, capacity and reliability of the system performance to be delivered to the homeowner. This training will teach you how to measure and calculate airflow, once verified we will discuss system charging and understanding superheat and subcooling. We will then learn how to use this information to calculate the system performance.

This class is designed for installation and service personnel.

Course Outline

  • Installation best practices
  • Basic airflow measurement for heat pumps and gas furnaces
  • Refrigerant cycle, sub-cooling / super heat
  • System performance and capacity
  • Tools Necessary for Installation and Start up

Attendees passing the test at the end of the class will be eligible for 4 hrs continuing education NATE Hours and Distributor training hours.

NATE Class ID 6114-0019 Cost: $35.00

Check, Test, & Start-up class will be conducted in 2 (2-Hour Sessions).

Which will be held on these dates.

October (all on Friday’s from 8am – 10am)

                October 9th (session 1), Oct 16th (session 2)

November (all on Monday’s from 8am – 10am)

                November 9th (session 1), Nov 16th (session 2)

December (all on Friday’s from 8am – 10am)

                December 4th (session 1), Dec 11th (session 2)

To register, please select one of the following months:

Use your training coupon to purchase the courses below


Course Information

Light Commercial Rooftop & Splits

In this class we will cover the common components that make up the current light commercial line of RTU’s and Split Systems. In this class we will break down the components in details covering operation and trouble shooting. The class will introduce the new Eco Blue Carrier line of RTUs.

This class is designed for installation and service personnel.

Course Outline

  • CTB Central Terminal Board
  • Defrost Board
  • IGC Board
  • Hall Effect Control
  • Economizer Controls
  • Reheat Control
  • VFD Drives
  • Split System Controls
  • Eco Blue Motor and Controls

NATE class ID 6114-0008 Cost $35.00

Attendees passing the test at the end of the class will be eligible for 6 hrs continuing education NATE Hours and Distributor training hours.

Light Commercial Systems class will be conducted in 3 (2-Hour Session’s)

Which will be held on these dates.

October (all on Wednesday’s from 8am – 10am)

                October 14th (session 1), October 21st (session 2), October 28th (session 3)

November (all on Wednesday’s from 8am – 10am)

                November 4th (session 1), November 11th (session 2), November 18th (session 3)

December (all on Wednesday’s from 8am – 10am)

                December 2nd (session 1), December 9th (session 2), December 16th (session 3)

The MEETING info will be email out before the meeting to all that register for this class.

To register, please select one of the following months:

Use your training coupon to purchase the courses below


Course Information

Carrier Open Controls/Zoning Class

This class is an entry to Carrier’s current Open controls product. This one-day class will acquaint the student with the tools and methods required to install and commission Carrier product-integrated controls. These controls include the Carrier RTU Open Controller that can be factory-installed on most rooftop units up to and including 20 Tons, and the VVT/VAV zoning controls. The class will also cover the use of factory-installed programmable Universal Protocol Converters (UPC).

This class is not associated with the Carrier Controls Expert program.

This class is designed for installation and service personnel.

Course Outline

  • Tools necessary for Installation, Start-up and Service
  • Field- and Factory-Installed RTU Open Controls
  • Zone Sensors
  • Airside Unit Accessories
  • Factory-Installed Universal Protocol Converters (UPC)
  • Zoning Applications
  • Zoning Design and Limitations
  • Zoning Commissioning

The class is scheduled for 8 hours.
8am until 4pm

Cost $35.00

The MEETING info will be email out before the meeting to all that register for this class.

Minimum of 10 participant required by Nov 27th to hold training.

December 8th 8am-4pm


Scroll to Top