Technical Training Schedule

CHANGE Spring Technical Training will be held Virtually & In-person

For in-person training the Technicians seat must be reserved, as we are limited by seats.

To participate in the Virtual/Zoom technical training you will need internet access and a device with speakers. You can participate with any PC. Laptop, Tablet or Smart Phone with internet access. Instructions for the ZOOM meeting can be found in the technician’s account.

If you have questions please email us at amatechtrainer@cematraining.com

2022 Spring Training Catalog

March-May 2022

Class Coordinator Contacts: 

Josh Goodman @ Josh.goodman@carrierenterprise.com

Maggie Johns @ Maggie.johns@carrierenterprise.com

How does the registration process work? FAQ’s


Course Information

Next Generation Infinity Greenspeed / Evolution Extreme & 5-Stage Variable Speed Systems

We will cover installation of the outdoor unit, indoor unit, and User Interface. We will discuss features and functions of the system and how to ensure proper airflow and understand the critical charging of these systems. We will cover troubleshooting error codes and steps in determining the source of the error code.

This class is designed for installation and service personnel.

This class is one of the requirements for dealers to purchase Carrier and Bryant Variable Speed products. 

Course Outline 

  • 24/26 Next Gen Greenspeed / Extreme Evolution, 18/19 5-Stage Variable Speed Installation
  • 24/26 Next Gen Greenspeed / Extreme Evolution, 18/19 5-Stage Variable Speed Set Up and Operation
  • FE Fan coil Setup and Operation
  • User Interface Startup / Using it as a service tool
  • Troubleshooting Codes Explained 
  • Troubleshooting Procedures 
  • Tools Necessary for Troubleshooting

Attendees passing the test at the end of the class will be eligible for 8 hrs continuing education NATE Hours and 8 Distributor training hours.

NATE Class ID 6114-0018 Cost $45.00

Want to purchase the course for someone else? Give them a Training Coupon

Click below to learn more

March

Virtual/Zoom

March 15th 8am – 4pm


April

Virtual/Zoom

April 7th 8am – 4pm


May

Virtual/Zoom

May 3rd 8am – 4pm

OR

In-person (Hanover, MD)

May 3rd 8am – 4pm


Course Information

Carrier Ductless Systems

We will cover installation, operation and troubleshooting of the Carrier/Bryant ductless systems. We will discuss features and functions of each model and how to set it up properly. We will cover troubleshooting error codes and proper steps in determining the source of the error code.

This class is designed for installation and service personnel.

Course Outline

  • Ductless single and Multi-head Installation
  • Ductless Set Up
  • Sequence of Operation
  • Troubleshooting Codes Explained
  • Troubleshooting Procedures
  • Tools Necessary for Troubleshooting

Attendees passing the test at the end of the class will be eligible for 8 hours continuing education NATE Hours and 8 hours Distributor training hours.

NATE Class ID 6114-0003 Cost $45.00

Want to purchase the course for someone else? Give them a Training Coupon

Click below to learn more

March

Virtual/Zoom

March 29th 8am – 4pm


April

Virtual/Zoom

April 19th 8am – 4pm


May

Virtual/Zoom

May 5th 8am – 4pm

OR

In-person (Richmond, VA)

May 5th 8am – 4pm


Course Information

Check Test & Start up

Airflow is one of the most important factors in Residential system performance, charging, and system capacity with today’s advanced systems.  Using the industry’s “Best practices” and proper startup techniques are paramount to ensure the comfort, capacity and reliability of the system performance to be delivered to the homeowner. This training will teach you how to measure and calculate airflow, once verified we will discuss system charging and understanding superheat and subcooling. We will then learn how to use this information to calculate the system performance.

This class is designed for installation and service personnel.

Course Outline

  • Installation best practices
  • Basic airflow measurement for heat pumps and gas furnaces
  • Refrigerant cycle, sub-cooling / super heat
  • System performance and capacity
  • Tools Necessary for Installation and Start up

Attendees passing the test at the end of the class will be eligible for 4 hrs continuing education NATE Hours and 4 Distributor training hours.

NATE Class ID 6114-0019 Cost: $45.00

Want to purchase the course for someone else? Give them a Training Coupon

Click below to learn more

March

Virtual/Zoom

March 16th 8am – 12pm


April

Virtual/Zoom

April 13th 8am – 12pm


May

Virtual/Zoom

May 11th 8am – 12pm

OR

In-person (Richmond, VA)

May 11th 8am – 12pm


Course Information

Carrier Zoning & Duct Diagnostics

We will cover the different types of Carrier zoning. What zoning can and cannot do. Installation, setup and operation of the Infinity zoning system. We will discuss bypass dampers and its effects on system operation. We will have a conversation about how a service technician can approach a duct system to troubleshoot and offer corrective actions.

This class is designed for installation and service personnel.

Course Outline

  • Zoning application
  • Infinity Zoning Set Up
  • Infinity Zoning Sequence of Operation
  • Troubleshooting Codes  
  • Troubleshooting Procedures
  • Duct Diagnostics
  • Tools Necessary for Proper Troubleshooting

Attendees passing the test at the end of the class with a 90% or higher will be eligible for 6 hrs continuing education NATE Hours and 6 Distributor training hours.

NATE Class ID 6114-0020 Cost: $45.00

Want to purchase the course for someone else? Give them a Training Coupon

Click below to learn more

March

Virtual/Zoom

March 31st 8am – 3pm


April

Virtual/Zoom

April 14th 8am – 3pm


May

Virtual/Zoom

May 19th 8am – 3pm

OR

In-person (Hanover, MD)

May 19th 8am – 3pm


Course Information

Light Commercial Rooftop & Splits

In this class we will cover the common components that make up the current light commercial line of RTU’s and Split Systems. In this class we will break down the components in details covering operation and trouble shooting. The class will introduce the new Eco Blue Carrier line of RTUs.

This class is designed for installation and service personnel.

Course Outline

  • CTB Central Terminal Board
  • Defrost Board
  • IGC Board
  • Hall Effect Control
  • 48 / 50 JC Variable speed RTU overview
  • Reheat Control
  • VFD Drives
  • Split System Controls
  • Eco Blue Motor and Controls

NATE class ID 6114-0008 Cost $45.00

Attendees passing the test at the end of the class will be eligible for 6 hrs continuing education NATE Hours and Distributor training hours.

Want to purchase the course for someone else? Give them a Training Coupon

Click below to learn more

April

Virtual/Zoom

April 21st 8am – 3pm


May

Virtual/Zoom

May 17th 8am – 3pm

In-person (Hanover, MD)

May 17th 8am – 3pm


Course Information

Carrier Open Controls

This class is an entry to Carrier’s current Open controls product. This 4-Hour class will acquaint the student with the tools and methods required to install and commission Carrier product-integrated controls. These controls include the Carrier RTU Open Controller that can be factory-installed on most rooftop units up to and including 20 Tons. The class will also cover the use of factory-installed programmable Universal Protocol Converters (UPC).

This class is not associated with the Carrier Controls Expert program.

This class is designed for installation and service personnel.

Course Outline

  • Tools necessary for Installation, Start-up and Service
  • Field- and Factory-Installed RTU Open Controls
  • Zone Sensors
  • Airside Unit Accessories
  • Factory-Installed Universal Protocol Converters (UPC)

Cost $45.00

Want to purchase the course for someone else? Give them a Training Coupon

Click below to learn more

May

Virtual/Zoom

May 4th 8am – 4pm


Scroll to Top